kuailaya Coolant Dye, Coolant Dye Leak Detection Kit Precisely Locate

Brand: kuailaya

Features:

• Complete Leak Detection Solution: Our kuailaya coolant leak dye detection kit integrates two core functions: leak detection and cleaning. It offers precise and efficient leak detection, and thorough and convenient cleaning, achieving a complete closed loop from accurate location to complete cleaning
• High-Sensitivity Fluorescent Leak Detection: The coolant dye can detect even minute leaks, displaying a bright yellow-green fluorescence under a dedicated light, making the leak point immediately apparent
• High-Efficiency Dye Removal: The dye remover uses a fast-acting dissolving formula; a simple spray and wipe removes residual fluorescent stains, safely and without damage to metal, plastic, rubber, and paint surfaces
• Easy to Use: Inject an appropriate amount of fluorescent leak detector into the system to be tested and allow the detector to circulate fully. Illuminate the leak with a dedicated light to mark the leak location. After inspection, evenly spray the fluorescent dye cleaner onto the fluorescent residue. Let it sit for a moment, then gently wipe it off with a cloth
• Wide Compatibility: This coolant leak detection kit suitable for radiator coolant systems hose heater core water pump.

model number: OYUS057

Part Number: OYUS057

Details: This kuailaya coolant leak dye detection kit is a complete fluorescent tracer leak detection solution, including a fluorescent leak detection and a fluorescent dye remover. The two are scientifically combined to provide a one-stop solution for leak detection in automotive, engine lubrication, hydraulic systems, and industrial pipelines, from precise leak detection to thorough cleaning.
Leak Detection Steps:
1. Depending on the system type, inject an appropriate amount of fluorescent leak detector into the air conditioning system, engine coolant.
2. Start the engine or run the equipment briefly to allow the leak detector to circulate fully.
3. In a low-light environment, illuminate suspected areas such as pipe joints and seals with a dedicated light; leak points will fluoresce brightly.
4. Record the leak location for subsequent repairs.
Cleaning Steps:
1. Ensure the surface to be cleaned has cooled to room temperature.
2. Spray evenly onto the areas with fluorescent dye residue from a distance of approximately 15-20 cm.
3. Allow to stand for 10-30 seconds to allow the cleaner to fully dissolve the fluorescent dye.
4. Gently wipe with a cloth to remove the fluorescent dye.
5. Inspect the cleaned area with a dedicated light to confirm there is no fluorescent remain.
Precautions
1. A dedicated light must be used for leak detection; ordinary light will not stimulate fluorescence.
2. Add the appropriate amount of leak detection agent; excessive amounts may affect fluorescence or system performance.
3. It is recommended to wear gloves and safety goggles during operation and use the equipment in a well-ventilated area.
4. Before first use, it is recommended to test in an inconspicuous area.
5. Store in a cool, dry place, away from direct sunlight and high temperatures.

Package Dimensions: 8.4 x 6.2 x 1.7 inches